Conocimiento del producto

Conocimiento del producto Torque Tools on Line Crews: Calibration, Setting, Records

Torque Tools on Line Crews: Calibration, Setting, Records

Almost every bolted fitting on an overhead line — the bolted tension clamp, the suspension clamp bolt, the insulation piercing connector, the spacer clamp — carries a torque requirement somewhere in its documentation. That number is not decoration. Below it, the clamp does not develop its rated grip; above it, the bolt stretches, the casting […]
Conocimiento del producto Fittings for Coastal and Industrial Areas: What to Specify

Fittings for Coastal and Industrial Areas: What to Specify

Most catalogues quote one finish. A project on a coastal plain and one in an inland industrial zone can buy the same clamp in the same galvanised finish, and one will still be serviceable when the other is being replaced. The difference is not the clamp: one specification named the environment, the other left the […]
Conocimiento del producto Corona Rings, Arcing Horns and Grading Hardware

Corona Rings, Arcing Horns and Grading Hardware

Every overhead line hardware schedule has a long mechanical middle — tension clamps, suspension clamps, joints, dampers — and a short tail of parts that carry no conductor load. Corona rings, grading rings and arcing horns sit in that tail. They are ordered late, drawn as a sketch rather than a dimension, and are the […]
Conocimiento del producto OPGW and ADSS Hardware: What Optical Cable Fittings Need

OPGW and ADSS Hardware: What Optical Cable Fittings Need

Optical ground wire (OPGW) and all-dielectric self-supporting cable (ADSS) put fibre on the same poles and towers that carry power conductors. From a distance the hardware looks familiar: suspension points, tension points, dampers, clamps running down the tower. It is tempting for a line crew or a buyer to treat optical cable fittings as a […]
Conocimiento del producto Sag, Tension and Stringing: Why Fittings Come Last

Sag, Tension and Stringing: Why Fittings Come Last

Watch a crew string a new line and the sequence looks almost backwards. The conductor goes up first, gets pulled, gets measured, gets adjusted, and only then does anyone reach for a suspension clamp or a tension clamp. Crews new to overhead work sometimes ask why the hardware cannot go on during the pull — […]
Conocimiento del producto How to Read a Cable Lug Specification Sheet

How to Read a Cable Lug Specification Sheet

Every cable lug catalog page looks friendly until you actually have to order from it. A grid of part numbers, a column of conductor sizes, a stud dimension, a plating note — and somewhere a crimping chart that lives on a different page. Buyers who read only the part number and the biggest number in […]
Chatar en WhatsApp +86-15825688289 salesmanager@ggldf.com