CS14 kit Suspension clamp series
CS14 bracket supplied together with its matching clamp body as one assembly, so the eye and clevis are known to fit.
- Model: CS14 kit
- Product Type: Bracket and Clamp Set
The CS14 kit is the CS14 bracket supplied together with its matching clamp body, rather than as two separate items. The photo shows the two parts assembled.
Where it is used
It is bought when a complete suspension point is needed and the buyer does not want to match a bracket to a clamp. One part number covers the whole assembly, which removes the common mistake of ordering a bracket whose eye does not fit the clamp clevis.
How it holds the conductor
The clamp grips the cable in a polymer jaw; the bracket carries that load into the pole. Supplying them as a kit means the eye and clevis are already known to fit.
Fixing and installation
Assemble on the ground, then fix the bracket foot to the pole and close the clamp on the cable. Assembling at height with the bracket already bolted on is slower and drops parts.
How to Select the Right Model
Confirm when ordering:
| Parameter | Value |
|---|---|
| Cable outside diameter | Must be inside the clamp jaw range |
| Fixing surface | Pole or wall |
| Kit contents | Bracket plus clamp body; state if the fixing bolts are also needed |
| Breaking load | Confirmed per order — see the note below |
If you already hold CS14 brackets, order the clamp body on its own instead of the kit — the kit is for a complete new suspension point.
Sending an enquiry for CS14 kit
One message with the conductor size, the pole or wall fixing and the quantity is enough for us to come back with the model, the grip value and a price. Drawings are welcome in place of a written description.
Send us the cable type and size, quantity and destination port for a quotation with pricing and lead time. View all suspension clamp models →










