
PA03 Tension Clamp
The PA03 small-bore tension clamp anchors aerial cables of 3-7 mm diameter, rated 1.2 kN breaking load for short spans.
- Model: PA03
- Cable Diameter: 3-7mm
- Breaking Load: 1.2kN
Product Description
The PA03 is a small-bore tension clamp (anchor clamp) used to terminate insulated aerial cables at the termination point of a short span. It grips the cable over its full length so the mechanical tension transfers into the clamp body instead of concentrating on the cable jacket.
Because the clamp bore is matched to a specific cable diameter, it must be chosen against the actual cable — not against the span. Using a clamp whose bore is too wide reduces the grip pressure and the clamp can slip; too narrow and the jacket is crushed.
Install by hand. Rated 1.2kN breaking load.
Technical Specifications
| Item | Specification |
| Model | PA03 |
| Product Type | Small-bore Tension Clamp (Anchor Clamp) |
| Cable Diameter | 3-7mm |
| Breaking Load | 1.2kN |
| Product Category | Aerial Cable Accessories |
| Manufacturer | GGLDF |
How to Select the Right Model
Match your cable diameter to the row below. This series covers small-diameter cables from 1.5 mm to 15 mm.
| Model | Cable diameter | Breaking load |
| PA05 | 1.5-6mm | 2kN |
| PA06 | 2-6mm | 4kN |
| PA03 | 3-7mm | 1.2kN |
| PA07 | 3-7.5mm | 4kN |
| PA39 | 3-9mm | 4kN |
| PA08 | 3.5-6.5mm | 5.5kN |
| PA500 | 4.5-9mm | confirm against drawing |
| PA09 | 5-10mm | 8kN |
| PA600 | 8-15mm | confirm against drawing |
If your cable falls between two ranges, choose the model whose range sits closest to your cable diameter and confirm the fit with us before ordering.
Key Advantages
- Bore matched to small cable diameters for a firm grip without crushing the jacket
- Distributes tension along the cable length rather than at a single point
- Lightweight and compact for dense pole installations
- Rated 1.2kN breaking load
Typical Applications
- Dead-end and anchor termination of small-diameter aerial cables.
- Strain locations where the full cable tension must be absorbed.
- Short-span terminations on distribution poles and brackets.
- Service drop anchoring in aerial network construction.
Send us the cable diameter, span length, quantity and destination port for a quotation with pricing and lead time. View all tension clamp models →
