ODWAC-20 Tension Clamp for FTTH Cable

The ODWAC-20 FTTH drop cable clamp terminates 2×6 mm aerial optical drop cable, rated 1 kN breaking load.

  • Model: ODWAC-20
  • Cable Diameter: 2*6mm
  • Breaking Load: 1kN

Product Description

The ODWAC-20 is an FTTH drop cable tension clamp (anchor clamp) used to terminate aerial optical drop cables at the last span before a building or distribution point. The cable is gripped along the clamp body so the full mechanical tension of the span is transferred into the clamp rather than into the cable jacket.

Drop cables are small in diameter — typically 2 to 6mm for a two-core FTTH cable — so the clamp is sized to grip that range without crushing the jacket. The wedge profile is what gives the grip: it tightens as tension increases, so the clamp holds under load instead of slipping along the cable.

Because the jacket is not stripped and no electrical connection is made, this is purely a mechanical termination. Rated 1kN breaking load.

Technical Specifications

ItemSpecification
ModelODWAC-20
Product TypeFTTH Drop Cable Tension Clamp (Anchor Clamp)
Cable Diameter2*6mm
Breaking Load1kN
Product CategoryAerial Cable Accessories
ManufacturerGGLDF

How to Select the Right Model

Selection depends on two things: the drop cable diameter and the span length. Match the diameter to the row below, and confirm the breaking load is adequate for the span before ordering.

ModelCableBreaking load
ODWAC-152*6mm1kN
ODWAC-202*6mm1kN
ODWAC-21T2*6mm1kN
ODWAC-22/262*6mm1kN
ODWAC-22G2*6mm1kN
ODWAC-22Hconfirm against drawing1kN
ODWAC-22Sconfirm against drawing1kN
ODWAC-242*5mm1kN
ODWAC-24S2*5mm0.5kN
ODWAC-24SL2*5mm0.5kN

If your drop cable falls outside these ranges, send us the cable diameter and span length and we will confirm the model rather than guess.

Key Advantages

  • Wedge-type grip that holds under tension instead of slipping along the cable
  • Grips the outer jacket only — no stripping and no electrical connection required
  • Compact body, so several clamps fit on one pole bracket
  • Rated 1kN breaking load

Typical Applications

  • Dead-end and anchor termination of FTTH aerial drop cables.
  • Strain points where the drop cable span terminates before a building.
  • Aerial access network build-out and last-span installation.
  • Pole or bracket mounting on short access spans.

Send us the drop cable diameter, span length, quantity and destination port for a quotation with pricing and lead time. View all tension clamp models →

Chat on WhatsApp +86-15825688289 salesmanager@ggldf.com