Blog

Product Knowledge Insulation Piercing Connector Installation: Torque, Shear Nuts and Sealing

Insulation Piercing Connector Installation: Torque, Shear Nuts and Sealing

Insulation piercing connector installation comes down to three things: seat both conductors fully in their channels, tighten the shear-head nut until the hex head snaps off at its calibrated torque, and confirm the seal and end cap are seated before you leave the pole. None of it should be done by feel. The torque is […]
Product Knowledge Tension Clamp Types Compared: Compression, Bolted, Wedge and Preformed

Tension Clamp Types Compared: Compression, Bolted, Wedge and Preformed

When buyers ask about tension clamp types, they are usually not asking which one is strongest. All four structural families can hold a properly matched conductor. The real question is which one fits your conductor, the tools your crew actually carries, how permanent the termination has to be, and what happens when something needs to […]
Product Knowledge How to Install a Suspension Clamp: Conductor Seating, Torque and Armor Rods

How to Install a Suspension Clamp: Conductor Seating, Torque and Armor Rods

Suspension clamp installation gets about fifteen minutes of attention on a stringing job, and then carries the weight of the span for decades. When one of these fittings causes trouble later, the cause is usually in that quarter of an hour: the conductor walking through the body, the strands breaking at the keeper edge, the […]
Chat on WhatsApp +86-15825688289 salesmanager@ggldf.com